Rear Panel: 8 Channel - Qvis IZEUS 7000 NVR RANGE User Manual

USB port
Network
abnormal
Net
indication
light
HDD
abnormal
HDD
indication
light
Record light 1-16
IR Receiver IR

2.4 Rear Panel: 8 Channel

The 16 Channel NVR rear panel is shown below. See Figure 2-3:
Please refer to the following sheet for detailed information:
Name
USB2.0 port
Network port
RS-232
RS-232
COM.
High
HDMI
Media Interface
VGA
VGA
output port
© Copyright Qvis ®. All documentation rights reserved.
To connect USB storage device or USB mouse.
This indicator will light up, to alert you to when a network
error has occurred or there is no network connection.
This indicator will light up, to alert you to when a HDD error
has occurred or the HDD capacity is below specified
threshold value.
This indicator will light up to say if the system is recording.
This is to receive the signal from the remote control.
Figure 2-3
Function
USB2.0 port. Connect to mouse, USB storage
device, USB burner , etc..
10M/100M/1000Mbps self-adaptive Ethernet port.
Connect the network cable.
debug This is for general COM debug to configure IP
address or transfer transparent COM data.
High definition audio and video signal output port.
Definition It transmits uncompressed high definition video
and multiple-channel data to the HDMI port of the
display device. HDMI version is 1.4.
VGA video output port. Output analog video
video
signal. It can connect to the monitor to view analog
video.
8