Automatic Line Access
Automatic Line Access
SLTs may have their station programmed to access a particular CO Line, such as a private line
or a line from a Group of CO lines, upon going off-hook. This is useful in Centrex or PBX
applications when station users have dedicated or individual lines. Outside line dial tone is
received just by going off-hook, without dialing access codes.
Call Brokering
Enables SLT user on a CO call to Hook-Flash and make another CO call. Once this other call is
established, the SLT user can Hook-Flash to move back and forth between parties.
Call Forward
Single line telephones may direct intercom calls and transferred CO lines for forwarding to
another station. SLTs have access to all forwarding options that Key station users have:
Call Forward - All Calls [6]
Call Forward - No Answer [7]
Call Forward - Busy [8]
Call Forward - Busy/No Answer [9]
Call Forward - Off-Net [
Preset Call Forward
Call Pickup Directed
Tone ringing intercom calls, Initial Ringing CO calls and transferred outside line calls to
specific stations can be picked up by single line telephones. For this type of pickup, the
stations need not be in the same pickup group.
Call Pickup Group
Tone ringing intercom calls, transferred outside line calls, and initially ringing calls can be
picked up by single line telephones by dialing a special pickup code. The telephones must be
in the same pickup group.
]
.
Chapter 3 - Single Line Telephone Features
3-5