Call Park - Station - STARPLUS Triad 1 Product Description Manual

Call Park
Conditions
Intercom calls and CO line calls can be placed into the station's personal park location.
Calls parked in a personal park location are subject to the system call park recall timer.
A CO call parked in a personal call park location recalls to the station that parked the call,
when the call park recall timer expires. The CO call rings to this station until the system
hold timer expires. The CO call then recalls the Attendant (both the Attendant and
initiating stations are ringing), and the Attendant recall timer is initiated. When the
Attendant recall timer expires, the CO call is disconnected.

Call Park - Station

Call park (by station number) allows calls to be parked at stations, thus allowing for expanded
park locations.
While connected to an outside line:
1. Press TRANS button.
2. Dial [439] + [XXX] (XXX=station number). A confirmation tone sounds.
Call Park Pickup - Station
To retrieve a Station Park Call:
Dial [# 6] + user's station number, while at the user's telephone or from any telephone in the
system.
-or-
Dial [438] from the user's station.
Conditions
A flexible button may be assigned to Call Park feature code 439. The user can press that
flexible button and dial a station number on the dial pad.
8-button telephones must assign a pickup button on the telephone to have the pickup
feature.
Only one call can be in a park location at a time. Multiple calls to the same station park
location is not possible.
The #6 code is flexible and can be assigned in Flash 52 programming.
The call will be placed in the Station's Personal Park location.
Chapter 6 - Digital Station Operation
6-29