Single Line Interface Board (Slib) - STARPLUS Triad 1 Product Description Manual

Analog Station Boards

Single Line Interface Board (SLIB)

The SLIB board provides the interface to 12 2500-type telephones.
The SLIB signal interfaces with mechanical 90V ringers and lights 90V message waiting
lamps on 2500 sets as desired.
The SLIB board has one LED indicator for status.
The SLIB can accept one DTMF-A unit in a daughter board type arrangement. The
DTMF-A unit provides four DTMF Receivers. 2500 sets only, providing the MSG12 unit is
installed.
A Normal/Service switch located toward the top of the card allows the card to be inserted
or removed from the system while under power and also can be used to disable all
station circuits on the card.
The station connections are via one 50- pin female (amphenol type) connector located
on the front edge of the card.
The card ejector tabs are color coded green.
Figure 11-12: SLIB (Single Line Interface Board)
Chapter 11 - Triad 3 System Configuration
11-19