2-52
Chapter 2 - Digital Station Features
Private Line
Private line programming allows certain lines to ring at a specific station only. When placed
on Hold, these lines are active at the programmed station only. A private line can be
transferred to other stations, provided the station receiving the call has a loop button or
direct appearance of that CO line.
Pulse-to-Tone Switchover
When commanded, the system changes the signaling on an outside line from dial pulse to
DTMF (tone), allowing the use of common carriers behind a dial pulse outside line. This can
be done manually when dialing, or can be stored within a speed dial number.
Range Programming
The
Triad 1/2/3
Stations. Range programming allows you to program all parameters alike for the entire range
or you can change or modify a few items for all members in the range.
Remote Administration
The Remote Administration feature allows authorized personnel to access the administration
programming via a terminal device (portable telephone device or personal computer with
communications software package).
The feature permits the review and entry of the customer database in the same manner as via
the digital telephone. The terminal device can be connected directly to the RS-232C
connector on the Master Processor Board (MPB) on the
by a telephone modem linking the RS-232C connector (via a CO line) to a remote location.
When entering the system remotely via a terminal device, access to the 2400 baud modem
(optional
Database Upload/Download
Database Upload/Download provides a maintenance facility which is added to the Remote
Administration routine. This routine permits downloading of the database to a PC, when a
software change is made or when the system must be initialized and reprogrammed.
The routine facilitates the programming of a database on an in-house system which can be
downloaded to a PC, and then uploaded to a system in the field. After the system
maintenance is completed, the file saved in the PC can then be uploaded to the system.
System allow for range programming when programming CO lines and
Triad
1/2, On Board on
Triad
3) is available.
Triad 1/2/3
System, or can be accessed
Private Line