Off-Hook Preference; Night Service - STARPLUS Triad 1 Product Description Manual

6-52
Chapter 6 - Digital Station Operation
3. Press the SPEED button to complete the programming process.
Erasing Your Name
1. Dial [690] on the dial pad.
2. Press the SPEED button to complete the erasing process.

Night Service

The Night Service feature [604] provides a means to put the system in night mode from any
keyset or remove the system from night mode from any keyset as long as the system was put
in night mode by the Night Service feature flex button.
If the system was placed in night mode by the attendant using the Night Service (DND)
button or if the system was placed in night mode by the automatic schedule, the Night
Service flex button can not remove the system from night mode.
From an idle station:
Press the preprogrammed Night Service flex button. The system is now in the Night
Service Mode.
Removing Night Service Mode
Press the preprogrammed Night Service flex button again. The system is now removed
from the Night Service Mode.

Off-Hook Preference

If your phone has been programmed for Off-Hook Preference, you can access an outside line,
or a feature by going off-hook or pressing the ON/OFF button. It simulates the depression of
a specific button and can be programed by a station user or a database administration
programmer using code [691] + the button number.
While Off-Hook Preference is enabled, you may access internal intercom dial tone as follows:
1. Press the preprogrammed ICM button,
-or-
Dial your intercom number. (Do not lift handset or press ON/OFF button before dialing
intercom number.) LED lights steady and intercom dial tone sounds.
2. Dial an internal station or feature access code.
Off-Hook Preference Programming
If your phone is programmed for Off-Hook Preference and were given the ability to enable or
change the prime flex button:
1. Dial [691] on the dial pad.
Night Service