Call Park - STARPLUS Triad 1 Product Description Manual

7-10
Chapter 7 - Single Line Telephone Operation

Call Park

Call Park - System
The Call Park feature enables an outside call to be placed on hold and consult with, page, or
call an internal party prior to transfer.
While connected to an outside line:
1. Press and release the hookswitch. The caller is put on Exclusive hold.
2. Dial parking location (430 to 437) on the dial pad. A confirmation tone sounds.
3. If you hear busy tone, press and release the hookswitch to re-establish contact with the
called station, and press and release the hookswitch again prior to dialing another
parking location.
Retrieving a Parked Call
1. Lift handset.
2. Dial [#] on the dial pad.
3. Dial parking location (430 to 437) where the call was parked.
Call Park - Personal
While Connected to First Call:
1. Press the hookswitch momentarily. Intercom dial tone sounds.
2. Dial [438] on the dial pad (call is placed in personal park).
3. Dial desired number for second call.
4. Press the hookswitch momentarily. Intercom dial tone sounds.
5. Dial [438] on the dial pad (first call is returned and second call is placed in Personal Park).
Call Park - Station
While connected to an outside line:
1. Press the hookswitch momentarily.
2. Dial [439] + XXX (XXX = station number).
Retrieving a Station Park Call
Dial [# 6] + XXX (XXX = user's station number, while at the user's telephone or from any
telephone in the system).
-or-
Dial [438] from the user's station.
The user can alternately connect to the other call by doing a hook-flash and
dialing [438] as many times as necessary.
Call Park