Calling Station Handsfree Mode Override
To override Call Forwarding:
1. Dial [5#] followed by the desired station extension.
2. Press the appropriate preprogrammed button.
Call Back = [622]
Camp On = [620]
Executive Override = [625]
Message Wait = [623]
OHVO = [628]
Calling Station Handsfree Mode Override
Enables a calling station to override a called station's T intercom setting.
When placing a call to a station and handsfree is desired:
1. Dial [7#] on the dial pad.
2. Dial the extension number,
-or-
Press DSS button of desired station (call connects to the station in handsfree mode).
Calling Station Tone Mode Override
Enables a calling station to override a called station's H or P intercom settings.
When placing a call to a station and tone ringing is desired:
1. Dial [6#] on the dial pad.
2. Dial the extension number,
-or-
Press DSS button of desired station (call tone rings station).
Call Park
Call Park - System
An outside line can be placed into one of eight system park locations and can be retrieved by
any station that has a direct line appearance or an available Loop button. Parked calls have
their own recall timer that recalls the originating station, and if still unanswered, the
Attendant(s). An outside line may also be placed into a station park location. The station user
then dials a code followed by their station number to retrieve the call.
To consult, page, or call an internal party while connected to an outside line:
1. Press the preprogrammed CALL PARK flexible button. A confirmation tone sounds.
-or-
Press TRANS button. The caller is put on hold. Dial parking location (430 to 437) or press
the preprogrammed CALL PARK flexible button. A confirmation tone sounds.
Chapter 6 - Digital Station Operation
6-27