Intercom; Intercom Button - STARPLUS Triad 1 Product Description Manual

5-38
Chapter 5 - Electronic Telephone Operation
Conditions
Calls may be forwarded to any available station, ACD/UCD group, Hunt Group or VM
Group.
Destination station must have an direct appearance for that CO Line or Loop button and
not in DND or an error tone is presented to the originator and the call remains ringing at
their station.
Attendant stations do not send ID digits.
Intercom Button(s)
The Intercom Button feature provides station users the function of ringing a busy station via
the intercom without using the Camp On or Executive Override features. This also allows
stations to place intercom calls on hold.
Programming Flex Button as Intercom Button
1. Press the SPEED button twice.
2. Press the desired flexible button to be programmed.
3. Dial [645] on the dial pad. A confirmation tone sounds. If an error was made during entry,
an error tone is received.
Receiving an Intercom Call when Station is Busy (and has intercom button)
The calling station receives ringback tone instead of a busy tone. The called station hears
ringing and their intercom button LED starts flashing at the incoming CO line rate. This
indicates an incoming intercom call.
The called station can press the HOLD button to:
1. Place the current CO call on hold,
-or-
Place the current intercom call on hold. The intercom call is placed on hold on the
available intercom button.
2. Press the flashing INTERCOM button to answer the incoming intercom call, the following
message displays on called station's LCD:
By default, no INTERCOM buttons are assigned to any key stations.
C AL L F R OM S TA X X X
M M M D D Y Y
Sta XXX could also be a programmed station name.
Intercom Button(s)