Table of Contents
Advertisement
5-62
Chapter 5 - Electronic Telephone Operation
Conditions
CO Trunks and Internal Calls may be transferred into Voice Mail using this feature.
If no VMID digits are dialed by the transferring station, the identification digits of the
transferring station are sent to VM.
VM Tone Mode Calling Option
VM Tone Mode Calling feature lets the Voice Mail system override a called station's H or P
intercom settings.
The VM system must be programmed when placing a call to a station and Tone Ringing is
desired.
1. Dial [6#] on the dial pad.
2. Dial the station extension (call tone rings station).
Voice Mail One-Touch Recording
The One-Touch Recording feature lets the station user, while on an internal/external call,
press a button to have the system record the conversation into the station user's mailbox.
Code [649] + [VVV], where VVV = 440-447 for desired VM group.
While on an external call:
1. Station user presses the preprogrammed VM RECORD button. The LED flutters red at 240
ipm during the setup and the following message displays:
2. Once the system connects to the station, the user's mailbox, the flexible button LED lights
solid green and the LCD displays:
To pause or resume recording after a pause, press the preprogrammed 655 key.
3. When the user finishes recording, press the preprogrammed VM RECORD button. The
LED extinguishes and the normal LCD call information displays.
Use of this feature when the One-Touch Warning Tone is disabled may be interpreted
as a violation of federal, state or local laws, and an invasion of privacy. Check
applicable laws in your area before recording calls using this feature.
MiniVoice does not support Voice Mail One-Touch Recording.
R E COR D I NG S E TU P
M M M D D Y Y
M M M D D Y Y
0 0 : 0 0 a m
R E COR D I NG
0 0 : 0 0 a m
Voice Mail
Advertisement
Chapters
Table of Contents
