Call Pickup - STARPLUS Triad 1 Product Description Manual

Call Pickup

Conditions
Only one call can be in a park location at a time. Multiple calls to the same station park
location is not possible.
The #6 code is flexible and can be assigned in Flash 52 programming.
The call will be placed in the Station's Personal Park location.
Call Pickup
Directed Call Pickup
Upon hearing an unattended telephone ring:
1. Lift handset.
2. Dial [#1] on the dial pad.
3. Dial station number of ringing telephone. You are connected to intercom, incoming,
recalling, or transferred outside line.
Group Call Pickup
Upon hearing an unattended telephone ringing:
1. Lift the handset.
2. Dial [#0] on the dial pad. You are connected to intercom, incoming, recalling, or
transferred outside line call.
Call Transfer
Making an Unscreened Transfer
1. Briefly press and release the hookswitch.
2. Dial desired intercom number.
3. Replace handset to complete the transfer.
Making a Screened Transfer
1. Briefly press and release the hookswitch.
2. Dial desired telephone number. Announce the call.
3. Replace handset to complete the transfer.
Making a PBX/Centrex Transfer
1. Briefly press and release the hookswitch. Intercom dial tone sounds.
2. Dial [660]. A Flash command is presented to the PBX or Centrex CO Line (stutter tone
sounds).
3. Dial desired telephone number.
4. Replace handset to complete transfer.
You must be in the same Pickup group.
Chapter 7 - Single Line Telephone Operation
7-11