5-42
Chapter 5 - Electronic Telephone Operation
Message Waiting
Leaving a Message Waiting Indication
If you dial a station that is busy, unattended, or in DND, you can leave a message waiting
indication.
1. Lift handset or press ON/OFF button.
2. Dial the desired intercom station. Busy tone or DND tone sounds.
3. Press the MSG button. A confirmation tone sounds. Called party's MSG button slowly
flashes.
4. Replace the handset or press the ON/OFF button to end the call.
Answering a Message Waiting Indication
If your MSG button is flashing at a slow rate, you have a message waiting for you. The first
message left is the first one called.
1. Press flashing MSG button. Station that left message is signaled with tone ringing.
2. If called station does not answer, press MSG once to leave message.
Mute Key
The MUTE button provides privacy during speakerphone or handset operation by disabling
the microphone.
1. Press MUTE while off-hook on speakerphone or handset to activate.
2. Press the MUTE button again to deactivate. The mute feature automatically deactivates
upon call termination.
Name In Display
Every extension (key and SLT) has the capability to program the users name so that people
using display telephones see the name instead of the station number.
1. Dial [690] on the dial pad.
Up to five messages can be left at any Station.
Message Waiting