Co Line - Ringing Options; Co Ring Detect; Conference; Multi-Party Conference - STARPLUS Triad 1 Product Description Manual

CO Line - Ringing Options

CO Line - Ringing Options
When a CO call rings at a busy station, the call rings at the station using a muted ring signal.
This option allows a user to receive a reminder ring at their busy station, instead of muted
ringing. A reminder ring timer is also available to provide the reminder ring every time the
timer expires, as long as the incoming CO line remains connected. The system defaults this
option to muted ringing.

CO Ring Detect

The duration of the ringing signal from the CO or the PBX is matched with ringing detection
circuitry in the
100 ms increments. This timer helps prevent false ringing.

Conference

There are two different types of conferencing.

Multi-Party Conference

Up to eight parties can engage in a conference. A maximum of five external parties can be
conferenced.

Unsupervised Conference

The conference initiator can exit a conference with two outside parties and leave them in an
unsupervised conference. The initiator can re-enter the conference at any time.
The Triad 1/2/3
Loop Supervision is provided by the Telco and enabled in the database.
A programmable conference timer disconnects the unsupervised conference if the initiator
does not re-enter.

Conference Enable/Disable

The Conference Enable/Disable feature allows administering of the system conference
feature on a per station basis for the ability of a station to initiate a conference.

Database Printout (Dump)

Through a system programming command, either portions of or a complete database dump
can be printed using the RS-232C connector located on the Master Processor Board (MPB), on
the Triad 1/2/3
Triad 1/2/3. The ring detect can range from 200 to 900 ms programmed in
System can automatically terminate the call when both parties hang up, when
System.
Chapter 2 - Digital Station Features
2-27