System Configuration Tables; Digital System Capacity - STARPLUS Triad 1 Product Description Manual

10-30
Chapter 10 - Triad 1/2 System Configuration

System Configuration Tables

Triad 1 Ports
CO/PBX/Centrex Lines
DID Lines
T-1 Trunks
Stations
Analog Stations
Digital Telephones
Single Line Telephones
Triad 2 Ports
CO/PBX/Centrex Lines
DID Lines
T-1 Trunk
Stations
Analog Stations
Digital Telephones
Single Line Telephones
DTMF Receiver
DTMF Sender
I/O Ports
Conference
Circuits
Parties
DISA Circuits
Attendants
Digital DSS/BLF Units
Loop Supervision
Disconnect
Table 10-1: Digital System Capacity
36 Lines Max. (6 per LCOB Board)
36 Lines Max. (4 per DIDB Board). DTMF or dial pulse signalling.
48 Trunks Max. (24 per T1IB Board)
48 Max. (12 per ETIB Board)
72 Max. (12/24 per DTIB Board)
48 Max. (6 per SLIB Board)
36 Lines Max. (6 per LCOB Board)
36 Lines Max. (4 per DIDB Board). DTMF or dial pulse signalling.
48 Trunks Max. (24 per T1IB board)
48 Max. (12 per ETIB Board)
72 Max. (12/24 per DTIB Board)
48 Max. (6 per SLIB Board)
Each DTMF Receiver Module (DTRU) contains 2 DTMF
receivers. The DTRU Board mounts as a daughter board on the
LCOB, DIDB, and SLIB.
Each DTMF Receiver Module (DTMF-A) contains 4 DTMF
receivers. The DTMF-A Board mounts as a daughter board on
the T1IB.
Unlimited
3 (Max.) per system. (One RS-232C included on MPB)
5 Conferences per system.
8 parties per conference, of which 5 can be external.
Unlimited number of CO lines may be programmed
simultaneously.
Up to 3 stations can be designated as Attendants.
48 Max. Each DSS/BLF unit requires 1 station port and reduces
station capacity by 1. DSS/BLF maps may not be duplicated at
one station. One station may have up to three DSS/BLF units
associated with it.
700 msec. duration (CO or Internal call to SLT)
System Configuration Tables