Speakerphone - STARPLUS Triad 1 Product Description Manual

6-66
Chapter 6 - Digital Station Operation

Speakerphone

1. Press ON/OFF button to ON. Intercom dial tone sounds.
2. Press the Volume Bar to change the tone volume. The following message displays:
3. Press the party's DSS button, or press an available outside line button and dial the
number. Speakerphone is activated.
4. Press ON/OFF button to OFF to end the call.
Speed Dial
If an outside line was not specified in programming, one can be selected now or the system
assigns the line.
Press the SPEED button and dial speed bin location,
-or-
Press the preprogrammed speed bin button.
Station Speed Numbers
A keyset user can enter Station Speed numbers (9000 to 9019). Station Speed number entry
procedures are the same as those used for System Speed numbers.
System Speed Numbers
The first programmed attendant must enter the System Speed numbers (9020 to 9999). If an
attendant was not specified, speed numbers are entered at Station 100.
Storing Speed Dial Numbers
1. Press the SPEED button once.
2. Press an OUTSIDE LINE button or POOL button.
-or-
Select an outside line by pressing the SPEED button again.
3. Dial the speed bin location.
SP EA K E R TON E
M M M D D Y Y
For further references in this section where lift handset is specified, you may also
press the ON/OFF button, if the telephone is programmed as a two-way
speakerphone.
[#########]
H H :M M a m
Speakerphone