Direct Inward System Access (Disa) - STARPLUS Triad 1 Product Description Manual

Direct Inward System Access (DISA)

3. Dial [
-or-
Dial [#] to scroll down (previous entry) through the list,
-or-
Press another key to view the list for a different letter of the alphabet.
4. When the desired name displays on the LCD, press the SPEED button to automatically dial
the destination station or outside phone number (via speed dial).
To transfer a call using Directory Dialing while on a call:
1. Press the TRANS button.
2. Dial the Directory Dial Code [680] on the dial pad,
-or-
Press the flexible button programmed for directory dialing.
3. Press the digit associated with the person's name and when it displays, press SPEED to
automatically dial the destination station.
4. Hang up to complete the transfer.
Conditions
If the desired party is an intercom station, that station is signaled according to their
intercom selector/H-T-P switch (SLT stations tone ring).
If the desired party is associated to a speed dial bin, the system selects a CO line and dials
the number programmed into the speed dial bin. Call progress tones are then heard.
If station is in Directory Dial mode and a CO or intercom call rings in, the station must exit
Directory Dial mode to answer the call.
Direct Inward System Access (DISA)
1. Call the phone number the system administrator specified as the DISA line. The system
answers and returns internal dial tone.
2. Enter the DISA access code specified by the system administrator, if applicable. Dial tone
returns.
Placing an Outgoing Call
1. Dial a group access code: 9, 81–87. CO Dial tone returns.
2. Dial the desired telephone number.
] to scroll up (next entry) through the list,
.
Calls may be transferred to internal stations only. An attempt to transfer a call
off-net (via a speed dial bin) results in the call recalling upon going on-hook.
The conference timer monitors a DISA trunk-to-trunk call and release the lines
one minute after the time expires.
Chapter 6 - Digital Station Operation
6-37