Ring Tone - STARPLUS Triad 1 Product Description Manual

6-62
Chapter 6 - Digital Station Operation
Activating a Redial
Press the preprogrammed REDIAL flexible button,
-or-
Press the ON/OFF button,
-or-
Lift the handset, line is seized and number is dialed. If the user receives a busy/no answer,
they may repeat the step to activate another redial.
Cancelling the Operation
Press the preprogrammed REDIAL flexible button. A confirmation tone sounds and the Auto
Redial function is cancelled.
Conditions
Once the user presses the preprogrammed flexible button, the timer applies when the user
enters a digit. After a digit is entered, the inter-digit timer applies between the digits.

Ring Tone

The tone ring signal that notifies stations of an incoming call can be changed by each station
user to provide distinctive ringing among a group of stations. Each station user may select a
distinctive ringing tone used to ring their station. The system provides 36 different ring
patterns that station users may select from.
Selecting a Distinctive Ring Tone for a Station
1. Dial the Tone Ring program code [695] on the dial pad. The following message displays:
2. Enter a valid tone number. The telephone speaker sounds a steady tone that correlates to
the 2-digit entry.
3. When the desired tone is selected (default ringing code is set to 00), press the SPEED
button to save it as the tone to present when the station is tone rung. A confirmation
tone sounds.
This tone is presented as a result of an incoming CO or intercom call, recalling CO line or
Transferred CO line or at any other time the station is tone rung. The 2-digit tone number
displays in the lower left corner of the LCD display.
E N TE R R IN G TON E S
X X PR E S S S PE E D T O S AV E
00-36
Ring Tone