Personalized Messages - STARPLUS Triad 1 Product Description Manual

5-48
Chapter 5 - Electronic Telephone Operation
Retrieving a Parked Call
Dial the Personal Call Park location code [438] on the dial pad,
-or-
Press the preprogrammed PERSONAL PARK button. A talk path is established between the
two parties.
Conditions
Intercom calls and CO line calls can be placed into the station's personal park location.
Calls parked in a personal park location are subject to the System Call Park Recall Timer.
A CO call parked in a personal call park location recalls to the station that parked the call
when the Call Park Recall Timer expires. The CO call rings into this station until the System
Hold Timer expires. The CO call then recalls to the Attendant(s) (at this point, the
Attendant station and the initiating station are ringing), and the Attendant Recall Timer is
initiated. When the Attendant Recall Timer expires, the CO call is disconnected.

Personalized Messages

Each station can select a pre-assigned message to be displayed on the LCD of any key
telephone calling that station. There are ten possible messages which can be left.
1. Dial [633] on the dial pad,
-or-
Press a preprogrammed MSG button.
2. Dial the two-digit code for the message that appears. A confirmation tone sounds and
the DND button LED starts to flash.
00 = (clears messages)
01 = On Vacation
02 = Return AM
03 = Return PM
04 = Return Tomorrow
05 = Return Next Week
This feature is not available to the Attendant(s).
06 = On Trip
07 = In Meeting
08 = At Home
09 = On Break
10 = At Lunch
Personalized Messages