Triad 1/2 General Description; System Hardware Preferences; System Control And Flexibility - STARPLUS Triad 1 Product Description Manual

Triad 1/2 General Description

Triad 1/2 General Description
The Triad 1/2
telecommunication needs of medium-sized business offices. The
incorporate state of the art digital technology for command processing and voice switching,
using a Pulse Code Modulation/Time Division Multiplexing (PCM/TDM) distributed switching
matrix. The system supports MU law encoding based on the requirements of local
regulations. The
Employing a Universal Card Slot architecture with a small Basic, Basic and Expansion
cabinet to house plug-in Printed Circuit Boards.
Providing support for different types of instrumentation.
Utilizing the same common control and peripheral cards.

System Hardware Preferences

The Triad 1/2
Basic and Expansion KSUs are wall-mounted cabinets that house the back plane and
contains card slots for the system power supply, CO Line/Key Station/SLT Interface
boards, and other optional PCBs.
Station, CO Line, SLT and option boards are installed in any of the five system card slots up
to the system's maximum configuration.
MISU can be installed only in Slot #7 of the Basic KSU.
Digital Station/Line cards are installed in the following slots:
Triad 1
can only be installed in Slots 0, 1, and 2.
Triad 2
card can only be installed in the BKSU Slots 0-5.

System Control and Flexibility

The system architecture has been designed to allow a high level of software control over the
system's hardware. The software incorporates a vast array of features and capabilities
including PC Database Administration, ACD, etc.
The Triad 1/2
as single line devices. With the keysets, commonly used features are activated by direct
button selection. Many functions may be accessed by dialing specific codes or optionally, by
assigning these dial codes to flexible buttons on the keyset. In addition to key telephones, an
array of optional terminals are also available, including DSS/BLF consoles.
With the flexibility of the
array of instruments, the
needs of the most demanding customer requirements.
Systems are fully Digital Hybrid Key Telephone Systems, designed to meet the
Triad 1/2 Systems achieve a high level of flexibility by:
Systems can accommodate a variety of hardware as follows:
uses Slots 0 thru 2, 6 or 7, as well as any of the four slots in the EKSU. The T1IB card
uses Slots 1 thru 7 of the Basic KSU and any of the four slots in the EKSU. The T1IB
Systems support a combination of Digital Keysets and Electronic Keysets as well
Triad 1/2
Triad 1/2
Chapter 10 - Triad 1/2 System Configuration
extensive feature content, and the capability to use an
Systems can be tailored to meet the short and long term
Triad 1/2 Systems
10-3