Setting System Time And Date; Speed Dial - System Storing - STARPLUS Triad 1 Product Description Manual

Setting System Time and Date

Setting System Time and Date
The System Time/Date must be set by the first programmed Attendant.
1. Dial [692] on the dial pad. A confirmation tone sounds.
2. Enter date and time as follows: YYMMDDHHMM
When correct number of digits are entered, a confirmation tone sounds.
3. Press the ON/OFF button to OFF to update the display.

Speed Dial - System Storing

System Speed numbers must be entered by the first programmed Attendant. If no Attendant
is specified, enter at Station 100.
1. Press SPEED once, then press desired outside line key or select an outside line
automatically by pressing the SPEED button a second time.
2. Dial the System Speed bin location (9020-9999).
3. Dial telephone number.
4. Press the SPEED button.
5. Hang up.
YY = Year (00-99)
MM = Month (01-12)
DD = Day (01-31)
Pressing the TRANS button during number entry initiates a Pulse-To-Tone switchover.
Pressing the HOLD button during number entry inserts a Pause.
Pressing the FLASH key inserts a Flash into the speed number.
Pressing the TRANS button as the first entry in the speed bin inserts a no-display
character causing the numbers stored in the bin not to display on the Digital
Telephones when the bin is accessed.
Speed Bin numbers 9060-9099 are NOT monitored by Toll Restriction.
Chapter 8 - Digital Attendant Operations
HH = Hour (00-23)
MM = Minute (00-59)
8-21