Voice Mail; Voice Mailbox Button - STARPLUS Triad 1 Product Description Manual

5-60
Chapter 5 - Electronic Telephone Operation
Ringing CO lines not assigned CO line group access for a particular SLT may be answered
in a UDA service. Dialing privileges are not granted on CO lines that an SLT does not have
access to. CO lines not given UDA status may not be answered or accessed via UDA
procedures.
If two SLTs attempt to retrieve a single ringing CO line simultaneously, one user is
connected to the incoming CO line and the other user receives intercom busy tone.
The special ring mode is treated as day mode.

Voice Mail

Forwarding Callers to Your Mailbox
Intercom and Transferred CO callers may be routed directly to your mail box by forwarding
your phone to a voice mail group. Callers are then greeted by your personal voice mail
greeting, if available. (Refer to Call Forward - Voice Mail Operation.)
Retrieving Voice Messages
If your Message Waiting button or programmed Voice Mail Group button is flashing, you may
have a voice message waiting. To enter the voice mail system to check for mail:
1. Dial the Voice Mail Group number [440-447],
-or-
Press the preprogrammed Voice Mail group button or flashing Message Wait button.
2. When prompted, enter the mailbox password.

Voice Mailbox Button

A correctly programmed button will receive a message-waiting indication (MWI) from the
voice mail system. This allows any station with multiple voice mail buttons to receive the MWI
for each of the programmed buttons.
Station feature codes 460-467 represent voice mail groups 440-447 respectively, and 468
represents an external voice mail group. The functions of these codes are to provide:
Direct mailbox access for local and remote stations. This allows an attendant to have
one-button transfer directly to a mailbox.
Multiple MWI capability per key station. This allows one station to have MWI for multiple
mailboxes.
Multiple direct mailbox access. This allows one-button access to different mailboxes from
one keyset.
To program a Mailbox Button:
1. Press SPEED twice.
2. Press the desired flexible button to be programmed.
Voice Mail