Caller Id Name/Number; Calling Station Tone Mode; Call Park - STARPLUS Triad 1 Product Description Manual

Caller ID Name/Number

Caller ID Name/Number

The Caller ID Name/Number feature allows a station user to program a flexible button to view
both the number and name on the LCD when receiving a Caller ID CO call.
If the feature is enabled, the flex button LED is lit solid, and the name/number is displayed.
During the call, the user can press the flexible button to view the normal call information. The
top line of the LCD displays the number of the caller and the bottom line displays the name.
Conditions
When enabled, this display overrides transfer call LCD, ACD Ring, Call Pickup, and Answer
messages. If the user wishes to view the Line Number/Call Timer and the standard call
information they can press the flex button to toggle between name/number and normal
mode.
By default, no button is assigned on telephones. A flex button must be programmed for
this feature to operate.

Calling Station Tone Mode

Calling Station Tone Mode allows a calling station to override a called stations H or P
intercom switch settings.
When placing a call to a station and Tone Ringing is desired:
1. Dial [6#] on the dial pad.
2. Dial the extension number,
-or-
Press DSS button of desired station. (Call tone rings station.)

Call Park

Call Park allows you to place an outside call in park and consult with/page/call an internal
party.
While connected to an outside line:
1. Press TRANS button. The caller is put on Exclusive hold.
2. Dial parking location (430 to 437). A confirmation tone sounds.
3. If you hear busy tone, press TRANS twice and dial another parking location.
Retrieving a Parked Call
1. Lift handset or press ON/OFF button.
2. Press the pound [#] button.
3. Dial parking location (430 to 437) where the call was parked.
Chapter 5 - Electronic Telephone Operation
5-23