8-20
Chapter 8 - Digital Attendant Operations
Override
If Attendant Override is allowed, Attendant(s) stations may override or call stations that are
busy or in Do Not Disturb to alert them of a call.
Calling a Station Busy on a CO Call
1. Press the preprogrammed ATTN OVERRIDE button [601]. Three short tone bursts are
presented to the called party.
2. After five seconds, the station's CO line is automatically placed on hold and the Attendant
is cut-through.
Calling a Station in Do Not Disturb Mode
Press the preprogrammed ATTN OVERRIDE button. The station is signaled with a Camp
On tone.
Recall
When outside line is on hold for extended time period, a real ring sounds.
Press OUTSIDE LINE button flashing at a very fast rate.
Conditions
Recall does not apply to intercom calls placed on hold.
Release Button
The Release Button feature lets the station user disconnect calls while off-hook (on handset,
not speakerphone), speeding up call handling time.
While off-hook (on handset, not speakerphone) on an intercom call, transfer sequence, page
announcement, or CO call:
Press the preprogrammed* RELEASE button [641] to terminate intercom call, transfer
sequence, page announcement or CO call.
Override