Intercom Button(S); Intercom Calling; Intercom Signaling Select; Inter-Digit Time-Out - STARPLUS Triad 1 Product Description Manual

Intercom Button(s)

Intercom Button(s)

The Intercom Button feature provides station users the function of ringing a busy station via
the intercom without using the Camp On or Executive Override features. This also allows
stations to place intercom calls on hold. If calls are ringing on intercom buttons and a
Handsfree call is received, the Handsfree call is allowed and the calls ringing continue with
muted ringing.
Multiple intercom path buttons can be assigned to a single station, however up to five
internal parties can be placed on hold per station. Music-On-Hold is provided to intercom
callers on hold.
This feature can be programmed on any key station or DSS Console with an available flexible
button. If there is an available intercom button, a station calling that station cannot OHVO,
Camp On or Override that station. Depending on the key station programming, intercom
ringing is muted or reminder ringing.
If all intercom buttons are in use, then the station may utilize the Camp On or Executive
Override features. By default, no intercom buttons are assigned to any key stations.

Intercom Calling

The system's architecture allows non-blocking of intercom calls. A station is reached on
intercom by dialing the associated three-digit number.

Intercom Signaling Select

Users can control the method by which they receive intercom calls and signals. A convenient
intercom signal switch (electronic telephones) or HPT button (digital telephones) is located
on each telephone for easy selection. The choices are:
Handsfree (H) -- The station user, upon hearing a tone burst and voice announcement
over the speaker, can reply handsfree.
Privacy (P) -- The station user receives a burst of tone and a voice announcement over
their speaker. The microphone is deactivated for privacy. The called party must lift the
handset or press the MUTE button to answer the call.
Tone Ringing (T) -- A standard tone ring notifies the party of an incoming intercom call.
The called party answers by lifting the handset or moving the switch to the handsfree (H)
position or pressing the ON/OFF button.

Inter-Digit Time-Out

The Inter-Digit Time-Out feature allows programming of the inter-digit time-out on a
system-wide basis. This feature applies to intercom and LCR calls. DISA inter-digit time-out
remains unaffected by this timer.
Chapter 2 - Digital Station Features
2-41