Co Line Access; Co Line Queuing - STARPLUS Triad 1 Product Description Manual

5-26
Chapter 5 - Electronic Telephone Operation
Answering a Camp On
If you are on a connected call, you hear one burst of muted ringing and your CAMP ON
button is flashing, you have a call waiting for you.
1. Press the CAMP ON button. Any outside line you are connected to is placed on hold. You
may converse with the station placing the call.
2. Press flashing Outside Line button, if a call is being transferred.
If you do not have a Camp On button either:
Go on-hook with present call. Camp On rings through,
-or-
Place present call on hold. Then go on-hook. Camp On rings through.

CO Line Access

Accessing an Outside Line
1. Press idle CO line button, Pool button,
-or-
Dial CO line group access code or LCR access code.
2. Dial desired number for outside call.
3. Lift handset to converse or use speakerphone.

CO Line Queuing

A station can queue only one line at a time. If you see that a particular outside line is busy and
you wish to be placed on a list waiting for that line to become available:
Placing a Line Queue
1. Press desired busy OUTSIDE LINE button,
-or-
POOL button. (Busy tone sounds.)
2. Press preprogrammed LINE QUEUE button.
3. Replace handset or press ON/OFF button.
Answering a Line Queue
If you hear ringing and an outside line of the line group or a LOOP button, you queued onto is
rapidly flashing:
1. Lift handset or press ON/OFF button.
2. Press flashing OUTSIDE LINE button or LOOP button to answer.
If your station has been programmed for Preferred Line Answer, you receive the
line automatically upon lifting the handset.

CO Line Access