Call Forward - Busy - STARPLUS Triad 1 Product Description Manual

6-22
Chapter 6 - Digital Station Operation
Conditions
Call Forward remains engaged until manually released. When released, the station
number is returned to the LCD.
Calls cannot be forwarded to a station in the DND mode.
CO Line queues, a Message Waiting request, and pre-selected messages are canceled
when a station is placed in the Forward mode.
A Forwarded Call signals to the forwarded station in the Tone mode, regardless of the
Intercom Signaling Switch mode selection.
A station in the Forward mode can make outgoing calls.
A Camp On signal is allowed at the forwarded station if that station is busy.
A station denied the use of Call Forwarding receives an error tone when pressing the
CALL FORWARD button.
When in All Call Forwarding mode, ACD/UCD calls cannot be received.
If a CO Line rings into a station with manual Call Forward, the line sequences to the last
station of the chain. If the last station is in DND mode or does not have a Direct
appearance for the CO Line or a Loop button, the call reverts back to the first station.
If a CO Line rings into a station with both Station and Preset Call Forwarding, Station Call
Forwarding takes precedence. Once the Station Forward determines the station to be
rung as per above, preset Call Forward may then apply at the new station.
An unlimited number of stations can be set up in a Station Call Forward chain. However, a
station cannot forward to a station that is already a member of their chain.
If the last number of the Station Call Forward chain is in DND mode, the internal caller
gets a DND response.
Calls to a station in both Station Call Forward and DND mode follow the forward.
If a private line rings into a station with Manual Call Forward the CO Line forwards,
providing the forwarded station has a direct CO Line appearance or an available Loop
button.
Idle Keyset in hands-free mode does not follow no answer/busy-no-answer forwarding
for internal calls.

Call Forward - Busy

Activating Call Forwarding
1. Lift the handset or press ON/OFF button.
2. Press the FWD button or dial [640] on the dial pad.
3. Dial the Call Forward Busy code [8] on the dial pad.
4. Dial the desired destination number where calls are to be forwarded. A confirmation tone
sounds.
5. Replace handset or press ON/OFF button.
Call Forward: Station