Flexible Button Assignment - STARPLUS Triad 1 Product Description Manual

Flexible Button Assignment

Flexible Button Assignment

The Triad 1/2/3
programming from a remote location (off-site). Range programming can also be used to
assign these buttons to multiple stations.
Outside Line -- Automatically accesses assigned line. (User programmable)
DSS/BLF -- Automatically signal assigned station and provides BLF for off-hook and DND.
(User programmable)
Feature -- Any feature with a dialing code (Personalized Messages, Paging, Account
Code, Call Park, Music, etc.) can be assigned to a flexible button. (User programmable)
Group Access (ACD, UCD, Hunt, Voice Mail group pilot numbers) -- User programmable.
Speed Dial -- Automatically dials Speed number. (System, Station, Saved Number Redial,
Last Number Redial) (User programmable)
Pooled Group Access -- Some or all outside lines can be grouped; pressing this button
accesses the highest numbered unused CO line in that group.(User programmable)
Loop -- Used to answer a transferred call on a line for which a user does not have a button
assigned. (User programmable)
Unassign (Locked-Out) -- Specific buttons may be designated as unused or locked out.
When a button is programmed as unused, the button may not be programmed by the
station user using flex button programming procedures.
Flexible Port Assignments -- Allows assignment of stations and CO line numbers to any
station or CO line port in the system, and complete flexibility within the system
numbering plan. A station can be assigned a number between 0000-8999.
A CO line can be assigned a number between 001 and the maximum number of CO lines
in the system. Additional stations can be added to the system by reducing the number of
CO lines.
System has the following flexible button assignment features which enables
Chapter 2 - Digital Station Features
2-33