Message Waiting; Meet Me Page - STARPLUS Triad 1 Product Description Manual

6-50
Chapter 6 - Digital Station Operation
If an LCR Queue Call Back is activated:
1. When telephone is signaled, answer the call.
2. Desired telephone number is automatically redialed.
If an LCR Queue Call Back is activated and you wish to cancel that call back request:
1. Dial the LCR Queue Cancel code [626] on the dial pad.
2. Replace handset or press ON/OFF button.

Meet Me Page

Requesting Another Party Meet You on a Page
1. Dial the desired internal or external paging code.
2. Request that party meet you on the page.
3. Do not hang up, wait for the requested party to answer. As soon as the paged party
answers and is connected to you, the page circuit releases.
Answering a Meet Me Page
Go to the nearest telephone and dial [770] on the dial pad,
-or-
Press the preprogrammed MEET ME button. You are connected to the paging party.

Message Waiting

Leaving a Message Waiting Indication
If you dial a station that is busy, unattended, or in DND, you can leave a message waiting
indication.
1. Lift handset or press ON/OFF button.
2. Dial the desired intercom station.
3. Press the MSG button. A confirmation tone sounds. Called party's MSG button slow
flashes.
4. Replace the handset or press the ON/OFF button to end the call.
Only one LCR Queue Call Back request may be initiated by a station. When a
second request is made, the first request is cancelled.
If the 911 feature is enabled, the LCR access code is 800 instead of 9.
Up to five messages can be left at any Station.
Meet Me Page