Pbx/Centrex Transfer - STARPLUS Triad 1 Product Description Manual

PBX/Centrex Transfer

Retrieving a Parked Call
Dial the Personal Call Park location code [438] on the dial pad,
-or-
Press the preprogrammed PERSONAL PARK button. A talk path is established between the
two parties.
Conditions
Intercom calls and CO line calls can be placed into the station's personal park location.
Calls parked in a personal park location are subject to the system call park recall timer.
A CO call parked in a personal call park location recalls to the station that parked the call,
when the call park recall timer expires. The CO call rings to this station until the system
hold timer expires. The CO call then recalls the Attendant (both the Attendant and
initiating stations are ringing), and the Attendant recall timer is initiated. When the
Attendant recall timer expires, the CO call is disconnected.
PBX/Centrex Transfer
While connected to an outside line (PBX/Centrex):
1. Press the FLASH button. Receive transfer dial tone.
2. Dial a PBX/Centrex station number.
3. Hang up to complete the transfer.
Personal Messages
Each station can select a pre-assigned message to display on the LCD of any key telephone
calling that station. There are ten messages available.
To select a pre-assigned message:
1. Dial [633] on the dial pad,
-or-
Press a preprogrammed PERSONAL MESSAGES button.
2. Dial the 2-digit code for the message that displays. A confirmation tone sounds and the
DND button LED flashes.
00 = (clears messages)
01 = On Vacation
02 = Return AM
03 = Return PM
04 = Return Tomorrow
05 = Return Next Week
This feature is unavailable at Attendant stations. Stations cannot be call
forwarded and have this feature active.
Chapter 6 - Digital Station Operation
06 = On Trip
07 = In Meeting
08 = At Home
09 = On Break
10 = At Lunch
6-57