Table of Contents
Advertisement
CO Line Acc ess
CO Line Access
Description
CO line access is simplified at an SLT by dialing a CO line access code. The code may be
0-9, depending on Database Programming. CO line group access codes are also available.
Unused CO ports must be programmed as open.
Operation
To access any idle CO line:
1. Lift handset.
2. Dial [9].
Specific Line
To access a specific CO Line:
1. Lift handset.
2. Dial [ccc].
ccc = the CO line number/code for the desired CO line number (700-795)
Conditions
An SLT station may dial access any CO line that has been allowed in database
programming.
The dial codes 0-9 are mutually exclusive. When one or the other is programmed as
the Operator Code the remaining is assigned for out dialing at SLT stations.
The CO line(s) permitted for outgoing selection in any CO line Group, or individually,
are dependent on the station programming for CO line access.
Do Not Disturb (DND)
Description
SLT stations may place their telephones in DND mode to avert incoming calls.
Operation
To set DND:
1. Lift handset.
2. Dial [#] + [4].
To clear:
1. Lift handset.
2. Dial [#] + [4].
Calls to a station in DND will hear DND Tone.
Chapter 4 - SLT Features and Operation
4-9
Advertisement
Table of Contents
