Headset Mode - STARPLUS Triad 1 Product Description Manual

6-42
Chapter 6 - Digital Station Operation
Conditions
While using the speakerphone, lifting the handset turns off the speakerphone. To activate
group listening, press the ON/OFF button (to ON) while the handset is off-hook.
While in group listening mode, pressing the MUTE button causes the transmit from the
handset to be muted (the speakerphone microphone is already muted). However, the
distant end is still heard over the handset receiver and the station speaker.
If full speakerphone operation is desired while in group listening mode, simply set the
handset on-hook.
Group listening is unavailable when the station is in headset mode.
When placing the handset on-hook to full speakerphone operation, it is normal for a to
hear a squeal caused by audio feedback. To eliminate this noise, press MUTE prior to
initiating speakerphone operation.
Must be enabled in Station Programming.

Headset Mode

Activating Headset Mode
Dial [634] on the dial pad,
-or-
Press preprogrammed HEADSET MODE button. LED lights steady.
Deactivating Headset Mode
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button. LED extinguishes.
Hold - Exclusive
When a line is placed on Exclusive Hold, no other station in the system can retrieve the call.
Exclusive Hold may be programmed for activation when the Hold button is pressed once or
twice. CO Lines, while in a transfer hold, are always placed in an Exclusive Hold condition.
While Headset mode is active, the ON/OFF button activates the headset and disables
speakerphone and intercom call announce operation at your station.
To install the headset, see the Installation Manual.
Station must be programmed in database programming for headset operation before
flex button can be programmed.
Headset Mode