Account Codes - STARPLUS Triad 1 Product Description Manual

Account Codes

Operation
Station users and attendants can press the 911 ALERT flexible button as necessary to view
additional 911 calls' information in the stored list. After a station user or attendant views the
information for all 911 calls in the system list:
All users' LEDs change to a solid red indication.
The audible ringing tone at all stations ceases.
The LCDs at all stations revert to a normal display.
The list remains available for review by pressing the 911 ALERT flexible button as necessary,
until after the messages are deleted.
To delete logged 911 Alert messages:
An attendant uses the following steps to delete the messages on a system-wide basis.
1. Press the 911 ALERT flexible button to display the 911 call information for deletion.
2. Press FLASH to delete that message.
Account Codes
When connected to an outside line call:
1. Press the preprogrammed ACCOUNT CODE button.
2. Dial account code up to 12-digits. (The other party does not hear the digits being dialed).
Account Codes/Traveling COS (Verified)
The Verified Account Code/Traveling Class of Service (COS) feature provides the ability to
track specific calls by entering a verified, variable length (up to 12 digits) identifier. Each
account code can be assigned a day and night Class of Service for determining the dialing
privileges allowed by that account code.
This feature provides a means for users to override a restricted station. If the dialed account
code matches the Verified Account code table, an intercom dial tone is returned, otherwise
an error tone is presented.
Using forced Account Codes is optional, available on a system-wide basis. SMDR must be
enabled for the account code to print as part of the SMDR record. The
allows up to 250 12-digit account codes for verification purposes.
If account code is less than 12-digits, an [
If account codes are forced, the account code must be entered prior to dialing the
outside number.
SMDR must be enabled for the Account Code feature to operate. Also, SMDR
must be enabled for the account code to become part of the SMDR record.
Chapter 6 - Digital Station Operation
] must be entered to return to the call.
.
6-7
Triad 1/2/3 System