Table of Contents
Advertisement
3-116
Chapter 3 - Key Station Features, Operation, and Programming
Private Line
Description
The Private Line assignment provides a quick and secure method of programming one or
more lines for access by only one station. If the associated Private Line is assigned to a
feature button at other stations, the button will light when busy but cannot be accessed
from Hold, answered on incoming calls, or used for outgoing access. Calls will not
forward and cannot be answered from Park location. The Private Line is used exclusively
by the station that is assigned the Private To station in system programming.
Conditions
Incoming calls signaling on a private CO line will ring its associated station regardless
of whether the CO line ring assignment is allowed in programming.
Private Line programming will override CO line ring and CO line receive.
Programming
Private To is a programming time saver. This parameter allows the programmer to assign
a specific CO to one station for their personal exclusive use. This setting over-rides CO
Line Assignment programming. When a station is assigned as the Private To station of a
CO line, that station exclusively receives ringing and access privileges to that CO line.
Default
The
DHS-L
201-272 and 301-372.
Pulse To Tone Switch-Over
Description
When the system is connected to Dial Pulse (rotary) outgoing CO lines, you may manually
force the system to output DTMF tones for access to special services over the same Dial
Pulse CO line.
Operation
When on a dial pulse CO line, dial [
Conditions
The dialing conversion can only be from Pulse Mode to Tone (DTMF) mode.
Private To is Empty (not assigned to any station). The Station range is from
Pulse to Tone Switch-Over can be programmed in any Speed Dial bin.
]. All subsequent digits are sent as DTMF digits.
✳
Pr ivate Li ne
Advertisement
Table of Contents
