Table of Contents
Advertisement
3-92
Chapter 3 - Key Station Features, Operation, and Programming
Single line stations cannot use system generated hook-flash.
Flexible Line Assignment
Description
A station may be assigned outgoing access to any or all of the system CO lines in System
Programming. The user may program any CO line to appear under any one of 20
dual-colored feature buttons. However, the line(s) cannot be used for outgoing calls
unless granted outgoing privileges by the system administrator. A station programmed
with Line Assignment privileges may retrieve held calls.
Flexible Receive Assignment
Description
Stations may be allowed to answer or retrieve from hold, specific CO lines assigned in
system programming. Receive assignments should be assigned to any stations that need
to answer incoming calls. A station does not have to hear ringing or be programmed with
Flexible Ring Assignment in order to answer an incoming CO line. Also, Call Pickup can be
used to answer the oldest incoming CO calls. During System Night Service operation,
Night Service stations will ring and can answer all incoming CO lines, regardless of the
normal Day mode configuration.
Flexible Ring Assignment
Description
A station can be programmed to ring for any, or all incoming CO lines. The Ring
Assignment will not establish ringing at any station that does not also have the Receive
Assignment enabled for the associated incoming CO line. In this situation, the CO line
appearance would provide a visual indication only, without the ability to answer the
incoming call by Direct Line Button Access. A designated Night Service station will
receive audible ringing and can answer all lines when the system is operating in the
Night Service mode.
Flexib le Li ne Assi gnment
Advertisement
Table of Contents
