2-14
Chapter 2 - Description and Installation
DTIB-16 Board
Each 16-Circuit Digital Interface Board (DTIB-16) supports up to 16 stations. Each station
is connected to the 16-Circuit Digital Telephone board through a single twisted wire pair.
A single 36-pin champ amphenol-type connector, located on the front panel of the card,
provides the wiring to the card.
SLIB-16 Board
The 16-Circuit SLT board supports up to 16 SLTs, both touch-tone and pulse dialing. Each
station is connected to the 16-Circuit SLT Card using a single-twisted wire pair, and a
single 36-pin champ amphenol-type connector located on the front panel of the card
provides the wiring to the card.
Figure 2-10: DTIB-16 (16-Circuit Digital Telephone Board)
Figure 2-11: SLIB-16 (16-Circuit SLT Board)
DHS- L Gener al Descr iption