Conference Time - STARPLUS DHS-L Technical Manual

3-82
Chapter 3 - Key Station Features, Operation, and Programming
Operation
1. Two CO lines are conferenced (F+[6]+[0]) at your station:
2. Press [FEAT ].
3. Dial [7] + [7]. At an Executive Telephone, the following display will be seen
momentarily.
4. If no further action is taken, the display returns to idle status. At this time, the two
lines are conferenced.
To rejoin the unsupervised conference:
1. At your station, press [FEAT].
2. Dial [6] + [0].
Programming
Station users may leave two CO line connected parties in conference unsupervised. That
is, the station user does not have to remain connected to the CO lines to maintain the
conference connection. This setting allows or disallows this function.
Default
The DHS-L
toggled either Y or N.

Conference Time

Description
CO lines that are left unattended in conference (Unsupervised Conference) will be
allowed to remain in this status for the duration of the Unsupervised Conference Time.
Users that are familiar with the conference operation can extend this time during
operation by dialing [0] + [
Default
The DHS-L
4/10/15 minutes.
LN x LN x
pr ivat e
UN S UP ER V IS ED
Unsupervised Conference is allowed Y, and the programmable value can be
Single Line Telephones (SLT) cannot conference.
], or [0] + [#] to disconnect.
✳
Unsupervised Conference Time is set for 1 minute, and is variable from 1/2/3/
f o r ce d
CNF
C onference