Table of Contents
Advertisement
3-52
Chapter 3 - Key Station Features, Operation, and Programming
Call Discrimination
Description
Provides sophisticated monitoring of digits dialed on CO lines. If a digit or range of digits
dialed on a CO line does not correlate with the Allow Digit Interval table, the CO line is
released immediately. On any non-allowed call, the station user will receive error tone
and the CO line button LED will extinguish. At an Executive Key Telephone, the user will
see Call Restricted on the LCD. The Toll Restriction Allow Digit Interval table may be
constructed in a matrix format and associated to any of the COS. Stations may be
assigned a separate COS for Day System Mode operation and Night System Mode
operation.
Override
Any CO line may be marked Toll Override Y. When set to Y a restricted station may access
that CO line and dial out.
Default
The
DHS-L
Call Forward
There are many Call Forward choices:
Forward calls when your telephone is idle.
Forward calls when your telephone is busy.
Use the Follow Me feature to receive calls at a temporary location and activate the
feature remotely from another station.
Forward your calls when there is no answer.
Combine busy and no answer call conditions for forwarding calls.
Forward Intercom calls, incoming CO and transferred CO calls.
Toll Override is marked N (NO).
Regardless of whether the station where calls are being forwarded is a key telephone or
singleline telephone, the useratthe forwardedstation will hear special IntercomReminder
tone signifying that Call Forward is activated.
Call D iscr imination
Advertisement
Table of Contents
