Forced Tone Ringing - STARPLUS DHS-L Technical Manual

Fo rced Tone Ringing

Forced Tone Ringing

Description
In certain environments where background noise is predominant or where speaker
volume has been minimized, a station in Voice Announce mode may not hear your voice
when you place an intercom call. This situation may be averted by using the Forced Tone
Ringing feature. After connection to a Voice Announce station, you may change the alert
signal at the called station from Voice Announce to Tone Ring.
Operation
1. You have just placed an intercom call to a station in Voice Announce mode and
cannot get a response. At an Executive Telephone, the display shows:
2. Dial [
Ringing. At an Executive Telephone, the display shows:
3. A Tone Ringing alert signal is sent and continues at the call station until answered.
4. If your call remains unanswered, you may dial [[] again to return to Voice Call
Announce mode.
Conditions
If you want to leave a Call Back request at a called station that doesn't answer, the
alert signal must be set for Tone Ringing.
V OICE STA
m sg
] to change the alert signal at the called station from Voice Announce to Tone
✳
STA xxx
c bc k
Chapt er 3 - Key Station Features, Opera tion, and Programming
xxx
msg
3-93