Table of Contents
Advertisement
3-46
Chapter 3 - Key Station Features, Operation, and Programming
Default
The
DHS-L
Attendant Station = 201
Programmable Range:
Attendant = 201-272 and 301-372
The
DHS-L
Conditions
The Attendant's personal 4-digit password is used by the attendant (or any other
station) to perform System Administration functions (Service Mode, Time of Day,
System Speed Dial programming).
Attendant Administration
Description
Attendant Administration is used to set the features Service Mode (Day/Night/Time). You
may enter into Attendant Administration using the password of the assigned system
Attendant telephone.
Operation
1. Press [FEAT ].
2. Dial [#] + [0]. The display shows:
3. Dial [1-6].
4. Press [save].
5. Enter password (0000).
6. Press [show].
System Service Mode
1. Press [svc]. The display shows:
2. Press [show] to select between DAY1, DAY2, DAY3, NIGHT, and TIME.
3. Press [CLEAR] to exit programming or [back] to change other features.
4. Press [next] to select RS-232, then select between RMP or ICLID.
default settings and Station Attendant ranges are:
Operator Code is [0], and the programmable value can be toggled to 0 or 9.
TEN A NT GR OU P : __
bksp
save
SER V ICE M OD E CH G
bac k
n ex t
c h g
sh o w
Attend ant Ad mi ni stration
Advertisement
Table of Contents
