Direct Station Selector (Dss) Console <Fp3; Dss Console - STARPLUS DHS User Manual

General Description
Direct Station Selector (DSS) Console <FP3>
Previously only available on the DHS-E, the Direct
Station Selector (DSS) Console is now also available on
the DHS. One DSS Console may be assigned to a
station. Each DSS Console uses one Digital Station
Port. Up to 12 DSS Consoles can be installed on a DHS
system.
The DSS Console buttons are programmed by the
Station User using the FEAT + # + 5 command, then
pressing the button on the DSS to be programmed. All
system feature codes may be stored on the
Programmable Feature Buttons for one-button
operation. Certain programmed feature buttons will
light when activated (DND, Call Forward, DSS/BLF,
etc.), while others such as Call Pick-Up, BGM and Last
Number Redial don't.
Features are separated into three distinct categories
for programming on a button: CO line, station, or
feature.
Figure 4: DSS Console
5