Table of Contents
Advertisement
Cal ler Id enti fi cation (ICLID )
Default
The
DHS-L
The
DHS-L
1200/2400/4800/9600/19200.
Name/Number Caller ID
Description
The calling party numbers should be displayed if available on incoming caller ID calls.
Operation
1. Incoming call originally appears as shown):
Calling Number/Name Display
Essentially, whenever an incoming call is received at the system, the name and number
received along with the ringing signal will be stored in the line control tables and used at
various points in the processing of the call.
The primary function implies that the calling name/number will be displayed (if available)
at any point where the LINE RINGING is displayed in the system.
CO Lines (700-771) are set for [0] not associated with an ICLID Port number.
RMTX_RATE is 1200 baud, and the range is programmable from 110/300/600/
After changing baud rate, the power must be reset on the ICLID box.
Vo d avi Co mm u n ic
20 2- 12 3- 4 56 7
If two lines are ringing in at the same time,the display will show the oldest
line information.
Chapt er 3 - Key Station Features, Opera tion, and Programming
3-65
Advertisement
Table of Contents
