Edge-Core ES3528MV2 Management Manual page 287

Description – A brief description of a class map. (Range: 1-64
◆
characters)
Add Rule
Class Name – Name of the class map.
◆
Type – Only one match command is permitted per class map, so the
◆
match-any field refers to the criteria specified by the lone match
command.
ACL – Name of an access control list. Any type of ACL can be specified,
◆
including standard or extended IPv4/IPv6 ACLs and MAC ACLs.
IP DSCP – A DSCP value. (Range: 0-63)
◆
IP Precedence – An IP Precedence value. (Range: 0-7)
◆
IPv6 DSCP – A DSCP value contained in an IPv6 packet. (Range: 0-63)
◆
VLAN ID – A VLAN. (Range:1-4094)
◆
W I
EB NTERFACE
To configure a class map:
Click Traffic, DiffServ.
1.
Select Configure Class from the Step list.
2.
Select Add from the Action list.
3.
Enter a class name.
4.
Enter a description.
5.
Click Add.
6.
Figure 140: Configuring a Class Map
– 287 –
| Quality of Service
C 11
HAPTER
Configuring a Class Map