Setting The Acl Name And Type - Edge-Core ES3528MV2 Management Manual

| Security Measures
C 13
HAPTER
Access Control Lists
S ACL
ETTING THE
N T
AME AND YPE
Source Guard filter rules, Quality of Service (QoS) processes, QinQ,
MAC-based VLANs, VLAN translation, or traps.
For example, when binding an ACL to a port, each rule in an ACL will use
two PCEs; and when setting an IP Source Guard filter rule for a port, the
system will also use two PCEs.
P
ARAMETERS
These parameters are displayed:
Total Policy Control Entries – The number policy control entries in
◆
use.
Free Policy Control Entries – The number of policy control entries
◆
available for use.
Entries Used by System – The number of policy control entries used
◆
by the operating system.
Entries Used by User – The number of policy control entries used by
◆
configuration settings, such as access control lists.
TCAM Utilization – The overall percentage of TCAM in use.
◆
W I
EB NTERFACE
To show information on TCAM utilization:
Click Security, ACL.
1.
Select Configure ACL from the Step list.
2.
Select Show TCAM from the Action list.
3.
Figure 192: Showing TCAM Utilization
Use the Security > ACL (Configure ACL - Add) page to create an ACL.
CLI R
EFERENCES
◆ "access-list ip" on page 952
"show ip access-list" on page 957
◆
– 354 –