12.0.1 Single Chart page
12.0.2 Window Selections
The default is the Two Line Small window. The CP390i and CPF390i windows may be
changed by the procedure below.
1. To change, press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and
press [ENT].
2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight WINDOWS SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
CP390i and CPF390i
Figure 12.0.1 - Example of Single Chart page
Figure 12.0.2 - Data window layout
Page 83