The Cp300/Cp300I Soft Keys; Getting Started; Power On, Off And Shuttlepoint Knob Operation - Standard Horizon CP300i Owner's Manual

The GOTO key
This key is very useful when you desire to start navigation (goto) to a Destination point.
When pressed, a popup window will be shown allowing you to select to start navigation to
Mark, a Route or the position of the cursor.
To stop navigation to a point, press [GOTO] and select STOP in the popup window.
The MARK key
This key places a Mark under the ship's position when in Home Mode. When the cursor is
shown and [MARK] is pressed it will place a Mark under the location of the cursor.
The ROUTE key
When pressed places a Waypoint. Succeeding presses place more Waypoints to form a Route.
The PWR key (Backlight and Contrast)
Press and hold [PWR] to turn the GPS Chart Plotter On or Off. Once on, press [PWR] to
show and change the Contrast and Backlight settings.
The MOB key
When pressed the GPS Chart Plotter automatically places a Mark on the Chart page under
the boat's position to aid in the rescue or a person that may have fallen aboard. To stop
navigation, press [GOTO], select STOP and press [ENT].
The FIND key
A dedicated key that allows searching the optional C-MAP B
for Port Services, Ports, Tide Stations, Wrecks, Obstructions, Points Of Interest, Lakes
Information, Lakes By Name, User Points, GPS Coordinates or Information on any point on
the chart.
3.0.0

The CP300/CP300i Soft Keys

The 6 keys in the bottom of the front panel (hereinafter named Soft Keys) have different
functions associated depending on the software: their labels are shown on the screen
immediately above the keys (the user can customize the function associated).
The Soft Keys
These keys allow quick selection to the many pages the GPS Chart Plotter has. These keys
can be customized to your preference, however from the factory the keys are preprogram-
med with the following pages. From left to right VIDEO, NAV, HIGHWAY, CELEST, CHART,
LIST. Press any of the keys and you will see popup windows above the keys. To goto a
specific page press the key with the desired popup window. The popup windows will
automatically disappear if a key is not pressed or can be removed by pressing [CLR].
3.1

GETTING STARTED

The Getting Started section will take you through the frequently used operations and assist
you to customize the look of the GPS Chart Plotter.
3.1.0

Power On, Off and ShuttlePoint knob operation

1. Press and hold [PWR] until the display shows the Start-Up page (see the following
picture). To turn Off, press and hold [PWR] until the display turns Off.
GPS Chart Plotters
+
J NT /MAX C-CARD
Y EPPESEN
Page 29