Selecting Pages With Soft Keys - Standard Horizon CP500 Owner's Manual

Point knob to the desired language and press [ENT] or move the ShuttlePoint knob to
the right.
5. Press [CLR] repeatedly or move the ShuttlePoint knob to the left repeatedly to exit the
menu and show the Chart page.
If the selected language is not available on cartographic data, English language is used.
If you have accidentally selected a language and are unable to select a language that is
understandable, perform the following procedure:
a. Select the Chart page.
b. Press [MENU] two times, move the ShuttlePoint knob to highlight the first (top) selection in the
menu and press [ENT].
c. A language window will be shown, press [ENT], select your language and press [ENT].
3.6

SELECTING PAGES WITH SOFT KEYS

The Soft Keys located under the LCD are used to select the pages quickly without the need
to go into the menu. The default pages are VIDEO, NAV, HIGHWAY, CELESTIAL, CHART
and LIST. When one of the Soft Keys is pressed popup windows above each Soft Key are
shown with the key description. Press the Soft Key with the desired page description and
the GPS Chart Plotter will change to that page.
CHART
GPS STATUS
WAAS 3D
CP500
Figure 3.5 - Language Selection menu
NOTE
WARNING
NAVIGATION
WAAS 3D
NMEA DISPLAY
Display example with FF525 connected
Figure 3.6 - Screen display pages
HIGHWAY
WAAS 3D
WAAS 3D
Display example with RADAR connected
R
CELESTIAL
Page 29