General Operation; Power Up Sequence; Powering Off - Standard Horizon CPN700i Owner's Manual

1 - GENERAL OPERATION

1.1 POWER UP SEQUENCE

1. Press the PWR key until the display shows the Splash Screen page (see A).
2. The Startup Screen page will be displayed in approximately 30-45 seconds (see B). This
page allows selection of the Chart Plotter, Media Player (video, audio and images),
Internet Browser and Connection Manager (for Wi-Fi
If a selection is not made within 30 seconds, the CPN Series Chart Plotter automatically
changes to Chart Plotter Mode.
1.1.1

POWERING OFF

1. The CPN Series Chart Plotters have three modes of operation. The GPS Chart Plotter,
Internet and Multimedia modes. When the CPN Series Chart Plotter is in any of these
modes and the
1 FOR CHART PLOTTER MODE ONLY: The
only in Chart Plotter Mode. It allows to disable touchscreen functionality for the Chart Plotter application.
See also "Touchscreen Disabling" in the Par. 1.2.1 "Touchscreen".
2. To turn off the CPN Series Chart Plotter, tap on
page tap on
Page 14
PWR key is pressed and held, a Shut Down window
. To exit from the Shut Down menu, tap on
® ®
, Bluetooth and Ethernet setup).
1
/
. To show the Startup Screen
Owner's Manual
will be shown:
option is present
.