Using The Configuration Tab; Figure 3 - Configuration - HID FARGO C50 User Manual

C50 Card Printer User Guide, Part Number PLT-01277, Rev 1.1
4.4

Using the Configuration tab

The Configuration tab has three sections: Optional Printer Features, Event Monitoring and Set
Language.
Figure 3 – Configuration
4.4.1 Selecting Optional Printer Features
Optional Printer Features enables the selection of optional features automatically or manually.
The default setting is that the Automatically detect features that are installed in your
printer check box is checked. The printer driver retrieves information about the installed
features from the firmware. Deselect the check box to enable manual feature selection. To
manually select a feature, click the corresponding check box. If no printer is detected, an error
message displays.
Page 19
© 2013 HID Global Corporation /ASSA ABLOY AB. All rights reserved.
June 2013