Panel Off Level - Ricoh D093 Service Manual

SP5-xxx Mode
Display IP Address
Switches the banner display of the IP address off and on. (Default: *Off)
[OFF] ON
5055
For example, if this SP is switched on, the IP address will be displayed below
"Ready" while the printer is in standby mode:
Ready
169.254.187.055
Coverage Counter Display
This SP switches the counter list for the system administrator on/off.
5056
[0 to 1/0/1]
0: On
1: Off
Set Bypass Paper Size Display
This SP determines whether long paper can be fed from the bypass tray.
Note: Even if "1" is selected only paper up to 432 mm can be used.
5071
[0 to 1 / 0 / 1]
0: Disable
1: Enable
5101

Panel Off Level

This SP sets the level of the low power mode, where the operation panel will
switch off after the machine enters low power mode.
[0 to 3/3/1]
0: 195 degrees
1: 180 degrees
2: 170 degrees
3: 155 degrees
D093/D094
CTL
2-108
CTL
CTL
SM Appendix