Main SP Modes
2953 LPH Joint Power Correction
Adjusts the four LEDs at each end of LPH 2. This fine adjustment is not usually
necessary in the field.
[-63 to +63 / 0 /1]
1 1-Dot: Left
2 2-Dot: Left
3 3-Dot: Left
4 4-Dot: Left
2954
Print Image Priority
Sets level for line thickness processing for vertical lines wider than 2-dots. This
SP is provided to adjust the settings if the desired image quality cannot be
obtained with the default settings. However, with the content of some settings
some scratchiness or other problems may occur in the images, so use this
adjustment with caution.
[0 to 3/1/1]
0: Strongest processing (thinnest)
1: Normal processing
2: Weaker processing
3: Weakest processing (thickest)
The illustration above shows how two elements comprise each dot. This example shows
vertical and horizontal 1-dot lines.
D093/D094
11 1-Dot: Right
12 2-Dot: Right
13 3-Dot: Right
14 4-Dot: Right
6-32
SM